HB3

The HB3 pallet box is the first and only completely closed pallet box on the market with welded runners. The box consists of two one-piece injection-moulded elements: the box body as the top part and the pallet with three welded runners as the bottom part. The HB3 pallet box is extremely rigid thanks to the welding of top and bottom part. The bending stiffness of this large load carrier can be increased with three metal profiles.
Construction and design of the box body ensure optimum hygiene. The smooth inner walls and the welded runners of the HB3 allow easy emptying, cleaning and drying. The almost invisible contour-milled welding seam, the clean and clear lines, the minimal ribbing and the rounded shape also contribute to this. The design of the hygienic pallet box has neither any cavities nor ribs and provides reliable protection against contamination or water ingress. The double-walled design of the side walls above the entry openings provides increased impact protection against forklift tines, while the reduced entry height ensures smooth workflows in automated high-rack warehouses. Thanks to the robust, welded runners with high dimensional stability, the hygienic HB3 pallet box runs maintenance- and trouble-free on all conventional conveyor systems. The circumferential stacking step in the top and bottom rim also make the HB3 compatible with a wide range of other pallet boxes.

Characteristics:

• Composed of one-piece injection-moulded top and bottom part with 3 welded runners
• Walls closed
• Strong runner connection 
• Double-walled side walls above the entry openings for increased impact protection against forklift tines
• Euro stacking system for compatibility with a variety of other pallet boxes
• Smooth interior walls for easy emptying and cleaning
• Runs maintenance- and trouble-free on all conventional conveyor systems and is also suitable for automated high rack warehouses.
• Temperature resistant from -30 to +40 degrees Celsius, briefly up to +90 degrees, resistant to most chemicals and cleaning agents.
• Stippled area for temporary adhesive labels
• The container is based on DIN EN 13626 and DIN EN ISO 12048

Options:

• One closed drain port with integrated thread and drilling mark, each on one long side (2-inch) and on one short side (1-inch)
• Reinforcement profiles
• RFID Transponder
• Lid
• Palgrip^® anti-slip runners
• Individual printing
• Different coloured upper part possible / lower part light grey